A pipe that splits inside a wall or ceiling turns into a flood in minutes, not hours. Close the main valve, call Water Heater Repairer, and a real person will connect you with a licensed and insured independent plumber close by, and a drying contractor if the water spread.
A burst pipe is two jobs at once: stopping the leak and dealing with the water it already dumped. We line up both trades so you are not making five calls while water keeps moving.
Pipe work inside walls touches code, so calls are routed to licensed and insured independent plumbers. Feel free to ask for their license at the door and verify it yourself.
We triage by severity, so active spray and sagging ceilings move to the front of the line. Response is typically fast, though a hard freeze can stretch every schedule in town.
The plumber explains what has to open up and writes a flat-rate price before cutting drywall. No surprise line items once the wall is open.
Plenty of the plumbers we route to bring acoustic listening gear and a thermal camera. That means smaller access holes and less guessing about where the split actually is.
Freeze breaks, corroded galvanized runs, cracked CPVC fittings, and slab leaks all come through this line. Tell the dispatcher what the pipe looks like and where it runs, and we match you with someone who works on that material every week.
When water has already soaked drywall, insulation, or subfloor, fixing the pipe is only half the job. A drying contractor with moisture meters, air movers, and dehumidifiers can be sent so the cavity dries out before the wall is patched. Closing a wet wall is how small leaks turn into mold calls months later.
The right repair depends on what the pipe is made of, where it runs, and why it failed.
Pipes running through outside walls, vented crawlspaces, and attics are the first to freeze. The ice pushes pressure toward a closed fixture until the pipe splits, and the leak usually shows up once it thaws.
Type M copper has a thinner wall than Type L, so it tends to split and pinhole sooner. The plumber cuts back to sound pipe and sweats or press-fits a permanent repair.
PEX rarely splits, but crimp and expansion fittings can blow off when water freezes inside them. CPVC turns brittle with age and heat, and old fittings crack if you so much as bump them.
A hot spot on the floor or a meter that spins with every tap closed points to a slab leak. The plumber locates it with listening gear and a thermal camera, then lays out spot repair versus a reroute.
Old galvanized pipe corrodes from inside out, and the threads are usually where it gives up. Patching one section of a rotted run often just moves the leak a few feet down the line.
Braided supply hoses on toilets, faucets, and washers can rupture at full line pressure with no warning. A relief valve on the water heater that drips or dumps water needs a look too.
Four steps, and you talk to a person at every one of them.
We walk you through finding the main shutoff and killing power to any wet circuits. Then we ask what the pipe is made of, where it runs, and whether a ceiling is bulging.
An independent licensed plumber near you heads over with fittings for copper, PEX, and CPVC on the truck. If water reached floors or walls, a drying contractor can be lined up on the same call.
The pro locates the split, looks over the rest of the line, and notes any pinholes or brittle fittings nearby. A written, flat-rate quote comes before any drywall is cut.
After the repair, the system is repressurized and tested, and joints are checked dry before the wall goes back. Ask about the contractor's own written workmanship warranty before they leave.
A push-to-connect coupling can stop a spraying line in minutes, which makes it a solid emergency patch. Most plumbers treat them as temporary inside a closed wall, and come back to sweat or press a permanent joint once things dry out.
Close the main valve, then call and we will route a local licensed plumber to you.
The line in the laundry room's outside wall froze and split the first really cold night. I found the main because the dispatcher stayed on the phone with me, and the plumber had the split copper cut out and replaced within a couple hours. He also showed me the Type M pipe and explained why it went first.
Our water bill doubled and the hallway tile felt warm. They found the hot line leaking under the slab with an acoustic detector and a heat camera. He gave us a written price for a spot repair and another for rerouting through the attic, and let us pick.
Water came through the dining room ceiling from an upstairs bathroom supply line. The plumber fixed the line and a water damage contractor showed up after to dry the ceiling and floor. Not having to find two companies on my own at night was the whole thing.
I manage a small rental, and a tenant called about a CPVC elbow that cracked under the kitchen sink. After the repair he showed me how brittle the other joints were, and two of them snapped in his hand. He quoted a full repipe of that wall in writing and did not pressure me to do it that day.
Close the main shutoff right away and kill power to wet areas at the panel. Drain the system by opening a low faucet, pull belongings out of the path, and call for a plumber.
Turn on the connected faucet and apply gentle heat with a hair dryer or a space heater nearby. Skip the torch entirely, because open flame starts wall fires and can burst the pipe with steam.
Many are rated for permanent use, but plenty of plumbers treat them as temporary inside a closed wall. Ask the plumber whether a sweated or press fitting makes more sense before the drywall goes back.
Acoustic leak detectors pick up the hiss of escaping water, and thermal imaging shows cool or warm patches where it spreads. Together they usually narrow the access hole to a small, patchable opening.
A single leak on newer pipe often makes sense to spot repair through the floor. If the line has leaked before or the pipe is old, rerouting through walls or the attic avoids chasing the next one.
Let faucets on outside walls drip on hard freeze nights and open the sink cabinets so warm air reaches the pipes. Heat tape and foam insulation on crawlspace and attic runs help a lot, and the plumber can point out the worst spots.
Calls go to independent plumbers covering Jourdanton, from older homes with galvanized pipe to new construction running PEX. Surrounding suburbs are part of the coverage, including zip codes like 78026.
Older homes near the center of town tend to have galvanized mains and thin copper branch lines, which is where pinhole leaks and corroded threads show up. Newer subdivisions lean on PEX and CPVC, where freeze-popped fittings and brittle elbows are the usual story. Wherever you are, tell the dispatcher the age of the house and we match the plumber to the pipe.
Frozen crawlspace pipes, attic runs, and slab leaks across older and newer houses.
Shared-wall leaks where stopping the water fast and documenting it for the association both count.
Surrounding towns around Jourdanton are covered by the same network.
